<acronym id="otrb4"></acronym>
    <span id="otrb4"></span>

      1. mastercam9.1日本兄弟機床加工中心CNC后處理下載

        技術小編 0

        mastercam9.1日本兄弟機床加工中心CNC后處理下載


        # -------------------------------------------------------------------------- 

        #| MASTERCAM MP POST PROCESSOR   | Always back up your post-processor       |

        #| CNC Software, Inc.            | prior to making any changes. It's easy,  |

        #| Control Model: FANUC 6M+      | just put a floppy in drive a:, at DOS    |

        #| Machine Model: GENERIC        | type "COPY C:\NC\*.PST A:"               |

        #| PST File Name: MPFAN.PST/TXT  |                                          |

        #| Executable   : MP.EXE 2.14    |                                          |

        # -------------------------------------------------------------------------- 

        #

        # --------------- 

        #| REVISION LOG  |

        # ------------------------------------------------------------------------

        # Programmers Note:

        # CNC  9/22/92  -  Initial post setup

        # pdr 12/01/92  -  1. Removed all graphical characters from post

        #                  2. Fixed post formatting (line lengths, etc.)

        # pbh 12/29/92  -  1. Removed duplicate program assignments (subprg, e, ...)

        #                  2. Fixed / Updated comments / manual entry

        # msf 04/02/93  -  1. Added postline pijk / plane change force I, J, K 

        #                  2. Added sgplane and !fr to prapid

        #

        # --------------- 

        #| FEATURES:     |

        # ------------------------------------------------------------------------

        # Users Note:

        #

        # Following Misc_Reals & Misc_Integers are used:

        #

        # mi1 - work coordinate system (0=G53, 1=G54, etc)

        # mi2 - sub program usage (0=off, 1=on/reps)

        # mi3 - Gear Range Select (0=Auto, 1=low, 2=med, 3=high)

        # mr1 - Drill Type calculation (0=Tip, dia=Spot/CSink or drill diameter)

        # mr2 - Compound Angle for above calculation

        #

        # Options / Usage

        #

        # 1. If Rotary axis is used set formula as follows: rotary : yes (else, no)

        # 2. If Sub Programs are used set formula to subs = yes & subprg : yes

        #    a.  Program Number is entered during post processing operation

        #        Sub Prog numbers are entered in parameter screen (See Mi2)

        #        Note: If "subs:no" is set in formula section then the program

        #              number is taken from the .NCI file. (Toolpath parameter)

        # mi1 -  work coordinate system (0=G53, 1=G54, etc)

        # mi2 -  sub program usage (0=off, 1=on/reps)

        #     -  Example: If (3) entered then program begins with current wcs (mi1)

        #                 and generates (3) wcs calls

        #                 Sample Main Output - G0GS90G54X_Y_

        #                                      G43H01Z.1

        #                                      G54M98P__

        #                                      G55M98P__

        #                                      G56M98P__

        #                                      etc..

        #

        #     -  Sub program numbers must be entered in parm page

        #     -  If sub numbers are the same for ntlchg's then nulls are combined

        #     -  If sub numbers are different then a new sub program is created

        # mi3 - Gear Range Select (0=Auto, 1=low, 2=med, 3=high)

        #     - If used set formula as follows: use_gear : yes (else, no)

        #     - Set formula set_g1 : 1000 (max low_sp) & set_g2 : 2000 (max med_sp)

        #     - Set sgear string accordingly

        # mr1 - Drill Type calculation (0=Tip, dia=Spot/CSink or drill diameter)

        #     - Set mr1 for Drill/Spot/CSink Diameter used or required for spot

        #     - Set mr2 for Compound Angle of drill or Csink

        #     - Post will add additional depth to NC output

        # mr2 - Compound Angle for above calculation

        #

        # --------------------------------------------------------------------------

        #

        # ROTARY INFO

        # Toolplane demo post - 1014 line in -.nci calls PROT

        # Tool axis vector is now available as vtoolx, vtooly, vtoolz

        # Rotation angles A,B and C are found from this vector

        # Rotary Positioning Support for vertical/horizontal axis rotary table 

        # (B axis).

        # Axis Substitution is activated, although a custom post may be required.

        # 4th/5th Axis Support of Head as illustrated below. Although, provisions must

        #  be made for actual XYZAB machine location for practical use. As application

        #  deems necessary.

        #  EX: Tilt in XZ plane ( A axis )

        #  EX: Tilt in YZ plane ( B axis )

        # New variable ROTAXTYP = 1 to inhibit error message in 4-axis positioning.

        # This variable may change.

        #

        # --------------------------------------------------------------------------

        #

        # --- NOTE: This post uses the 'subout' functions of the MP.EXE ---

        #  Extension strings override default extensions if given

        #  String can be supplied with or without dot (period)

        # sextnc     ncc    # -.NC  extension override string

        # sextsub    sbb    # -.SUB extension override string

        # sextaux    axx    # -.AUX extension override string


        # The --.pst file must set a flag to open the --.sub and --.aux files:

        #subprg : yes        # Open -.SUB file? yes/no  (set to: YES)

        #auxprg : yes        # Open -.AUX file? yes/no  (set to: no)


        # SUBOUT switches output to:

        #        0   --.NC file (main)

        #        1   --.SUB file

        #        2   --.AUX file

        # MERGESUB     *Merges --.sub file into main (--.nc) / no delete

        # MERGEAUX     *Merges --.aux file into main (--.nc) / no delete

        # CLEARSUB     *Clears --.sub file / delete

        # CLEARAUX     *Clears --.aux file / delete

        # nchar        *No. of characters in - .nc file

        # nchsub       *No. of characters in - .sub file

        # nchaux       *No. of characters in - .aux file


        # --------------------------------------------------------------------------

        # User defined input - prompt / entry occurs during posting

        # FQ 1 VARNAME TEXT TO BE ENTERED

        # --------------------------------------------------------------------------

        # --------------------------------------------------------------------------

        # Format Statements - i=incr, n=nonmodal, l=leave ldg, t=leave trlg, d=delta

        # --------------------------------------------------------------------------


        fs  1  0.4l

        fs  2  0.4

        fs  3  4 0

        fs  4  1 0ln

        fs  5  0.1t

        fs  6  2 0ln

        fs  7  4 0n

        fs  8  0.4li

        fs  9  0.4ln

        fs  10 1 0


        # --------------------------------------------------------------------------

        # Format Assignments

        # fmt  X 1 x  - x, y, z, i, j, k, xh, yh, zh, xr, yr, zr

        #               are init. fs 1, with 'normal' prefix letter

        # --------------------------------------------------------------------------

        # --------------------------------------------------------------------------

        # Axis output formats - Linear

        # --------------------------------------------------------------------------

        fmt  X 1 x        # X Axis Pos

        fmt  Y 1 y        # Y Axis Pos

        fmt  Z 1 z        # Z Axis Pos

        fmt  X 1 xr       # X Rapid Pos

        fmt  Y 1 yr       # Y Rapid Pos

        fmt  Z 1 zr       # Z Rapid Pos

        fmt  X 1 subrapx  # Recall Sub Rapid X

        fmt  Y 1 subrapy  # Recall Sub Rapid Y

        fmt  Z 1 subrapz  # Recall Sub Rapid Z

        fmt  X 1 xh       # X Home Pos

        fmt  Y 1 yh       # Y Home Pos

        fmt  Z 1 zh       # Z Home Pos

        # --------------------------------------------------------------------------

        # Axis output formats - Circular

        # --------------------------------------------------------------------------

        fmt  I 1 i         # Arc center description in X

        fmt  J 1 j         # Arc center description in Y

        fmt  K 1 k         # Arc center description in Z

        fmt    1 xc        # Arc Center X

        fmt    1 yc        # Arc Center Y

        fmt  R 9 arcrad    # Arc Radius

        fmt    1 sa        # Start angle for arc

        fmt    1 so        # Start octant for arc

        fmt    1 ea        # End angle for arc

        fmt    1 eo        # End octant for arc

        fmt    1 sweep     # Angle between start and end of arc

        # --------------------------------------------------------------------------

        # Axis output formats - Rotary / Tilt

        # --------------------------------------------------------------------------

        fmt  A 1 a         # A-axis rotation in degrees

        fmt  B 1 b         # B-axis rotation in degrees

        fmt  B 1 c         # C-axis rotation in degrees

        fmt    1 axis      # Axis of rotation 0=none, 1=X, 2=Y, 3=Z

        fmt  A 1 xangle    # Linear to rotary calc X

        fmt  B 1 yangle    # Linear to rotary calc Y

        fmt    1 frot      # Vector calc

        fmt  X 1 xnci      # Raw X Pos (NCI) / Endpt of tool axis vector

        fmt  Y 1 ynci      # Raw Y Pos (NCI) / Endpt of tool axis vector

        fmt  Z 1 znci      # Raw Z Pos (NCI) / Endpt of tool axis vector

        fmt  U 1 u         # X Pos / Endpt of tool axis vector

        fmt  V 1 v         # Y Pos / Endpt of tool axis vector

        fmt  W 1 w         # Z Pos / Endpt of tool axis vector

        fmt    1 tlnga     # Tool Length used for 5 Axis

        fmt    1 tlngb     # Tool Length used for 5 Axis

        fmt    1 tlngc     # Tool Length used for 5 Axis

        fmt    1 indexangle# Index angle (NCI 900)

        fmt    1 rotaxis   # Rotary Axis Substitution 0=None/1=X/2=Y

        fmt    1 rotdia    # Rotary Axis Substitution Diameter

        # --------------------------------------------------------------------------

        # Program & Sequence number format

        # --------------------------------------------------------------------------

        fmt  O 3 fprogname # Main Program No if subs : yes (User prompt)

        fmt  O 7 progno    # Program number

        fmt  P 7 subno     # Sub Program No.

        fmt  N 7 seqno     # Starting Sequence No.

        fmt  N 7 seqinc    # Sequence No.Increment

        fmt  N 7 n         # Main Program Seq No's

        fmt  N 7 sn        # Sub Program Seq No's



        下載完整版mastercam9.1日本數控機床PST文件


        mastercam9.1日本兄弟機床加工中心CNC后處理下載 mastercam 第1張


        如果

        1不會操作

        2需要優盤發送(補郵費和優盤費用)


        可以點擊下面聯系客服人工發送

        售后咨詢發貨等問題聯系


        mastercam9.1日本兄弟機床加工中心CNC后處理下載 mastercam 第2張


        詳情>點擊這里



        數控圈
        0

        標簽: mastercam9.1后處理

        如果本文對你有幫助,歡迎點擊下面贊賞我們

        發表評論 (已有0條評論)

        還木有評論哦,快來搶沙發吧~

        亚洲一区二区三区,国产精成人品,三级国产三级在线,免费a级黄毛片,国产精品夜色视频